| BRAND | Elabo |
| Product | 94-1F Z1809 |
| Description | Protective conductor test system for electric montances. Steel sheet body mounted, Rittal type |
| Internal code | IMP2019425 |
| Weight | 25 |
| Custom code | 90303370 |
| Technical specification | Color RAL 7035 with mounting plate for mounting a continuity test system. The system provides alternating current of max. 30 A. an idle voltage of 12 V ready and is used for testing of protective conductor connections overhead conveyors (passage measurement). The test current is supplied via a comparator card compared to a fixed threshold value. If the measured value is above the threshold value a good message is issued. An external voltage of 24 V is required for control DC required. The start of an exam is over the START button or by activating 24VDC possible externally. A test resistor is built in for self-testing. The control is possible with a 24V DC signal Equipment: - 1 START button (in the door) - 3 indicator lights ACTIVE / GO / FAULT (in the door) - 1 current transformer 30A - 1 mains transformer 400V / 50-60Hz +/- 10% !!! - 1 comparator card - 2 resistor R2 Button, indicator light, contactor from Siemens / Sirius. Clamps from Wago. Warning notice as screen print The connection is made via 4 PG screw connections at the bottom of the terminal box. W = 380mm, D = 210mm, H = 380mm |
Press on flag images to see contact information!
