| BRAND | HUBNER |
| Product | Type: FGH4KK-1024G-90G-NG/20P+FSE102 |
| Internal code | IMP4601241 |
| Custom code | 90318080 |
| Technical specification | Combined unit consisting of: incremental hollow shaft encoder in redundant version and mechanical overspeed switch Redundant systems: 2 electronic systems 2 optical scanners 2 terminal boxes 1 pulse disc construction type: hollow shaft with own bearings dimension drawing: HM 96 M 54228 KK degree of protection: IP 55 hollow shaft bore: 20 H7 with feather keyway max. perm. speed: switching speed + 500 rpm Specification of incremental encoder System 1: number of pulses: 1024 direct symmetrical square wave pulses supply voltage: 12...30 V DC rated load each output: 50 mA (Ri = 50 Ohm) System 2: number of pulses: 1024 direct symmetrical square wave pulses supply voltage: 20...30 V DC output voltage: 5 V acc. RS 422 rated load each output: 50 mA (Ri = 50 Ohm) max. frequency: 100 kHz special temperature range of electronics: -25 up to +85 dgrs. Cls. with LED check output connection each system: terminal box X1: right at view on drive end terminal box X2: left at view on drive end 12-pole strip clamping, connection for cable dia 14 - 15 mm, connection scheme EL 116 equipped with the following options each system: 1. Option (90): 90 dgr. phase displacement to basic pulse 2. Option (N): marker pulse, mechanically fixed 3. Option (G): inverted signals with sealed-in electronics Specification of overspeed switch: switching speed (rising): 1.089 rpm. (N/C) switching tolerance range + 60 rpm. test acceleration: 1 1/s2 switching capacity: 10 A, 230 V / 50 Hz we will attach the following parts (for axial fastening) separately to the consignment: - hexagon head screw M6 x 90 - DIN 931, - locking washer 6.4 - DIN 463 (for bending) - additional locking disk 6 for installations extremely difficult to access drawing No. 54260 |
default.send_request_amp_Group2