| BRAND | Z-LASER |
| Product | 722115032 / Z60-X20-H-F-450-elp45 |
| Description | High-precision laser module |
| Internal code | IMP4882651 |
| Technical specification | SYSTEM SPECIFICATIONS: Wavelength (typ.) 450nm Wavelength tolerance ±10nm Wavelength drift (typ.) 0.02nm/K Output power (typ.) 60mW Transverse Mode Single Transverse Mode RMS noise (20 Hz to 20 MHz, typ.) < 0.5% Peak-to-peak noise (20 Hz to 20 MHz, typ.) < 1% Boresight Error (Typ.) Typ. 3mrad Pointing stability <10μrad/K Power stability ± 3% over the entire temperature range Start time <2 sec APC operating mode Laser class (EN 60825-1) 3R ELECTRICAL SPECIFICATIONS: supply voltage 9-30VDC Operating current (max.) <300mA Electrical insulation potential-free housing M12 5-pin connector: A-pining connector Power consumption <2.7W I²C, RS-232 (5V) interfaces OPTICAL SPECIFICATIONS: Projection line, homogeneous intensity distribution Optical configuration Advanced DoF (elp) 45° opening angle Line straightness < 0.05% Line orientation parallel to Only in the clamping area Focusing range can be focused from 100 mm to 10,000 mm DIGITAL MODULATION: Maximum frequency: up to 400kHz Rise time <100 ns Fall time <100 ns Signal level < +0.9V (VIL_max) & > +2.2V (VIH_min) Operating range (VDC) ANALOG MODULATION: Maximum bandwidth <10Hz Linearity < 5% (from 10% to 100% of laser power) Active range 0-2VDC Impedance 100 kΩ to internal VCC (3.3 V) Max voltage range 0-30VDC ENVIRONMENTAL CONDITIONS: Operating temperature -10°C to +50°C/14°F to +122°F Storage temperature +40°C to +85°C/-40°F to +185°F Relative humidity (max.) <1W Shock and vibration in accordance with IEC EN 61373:2011, cat. 2 MECHANICAL SPECIFICATIONS: Case dimensions (⌀ x L) 20h7 x 117mm/0.79 x 461 in Material stainless steel Protection class IP67 |
default.send_request_amp_Group2